Sale!

F360 F400 F600 Black silicon carbide for abrasion-protection coatings

Abrasive refined by causing a thermal reaction to silicon carbide raw materials, composed of quartz stone and petroleum coke in an electric resistance furnace. Because it provides a large grinding force, it can be used in a wide range of fields. Base treatment Blasting such as deburring Lapping of glass, crystal and ceramics Letter engraving on stone materials Grindstone raw materials Polishing paper raw materials

$2,345.00 $2,300.00 /MT

F360 F400 F600 Black silicon carbide for abrasion-protection coatings
      Silicon carbide exists in about 250 crystalline forms. The polymorphism of SiC is characterized by a large family of similar crystalline structures called polytypes. They are variations of the same chemical compound that are identical in two dimensions and differ in the third. Thus, they can be viewed as layers stacked in a certain sequence.

      Alpha silicon carbide (α-SiC) is the most commonly encountered polymorph; it is formed at temperatures greater than 1700 °C and has a hexagonal crystal structure (similar to Wurtzite). The beta modification (β-SiC), with a zinc blende crystal structure (similar to diamond), is formed at temperatures below 1700 °C. Until recently, the beta form has had relatively few commercial uses, although there is now increasing interest in its use as a support for heterogeneous catalysts, owing to its higher surface area compared to the alpha form.

Specification of silicon carbide

Particle SizeParticle Distribution (µm)
Maximum Particle SizeParticle Size at d03Particle Size at d50Particle Size at d94
# 240≤ 127≤ 10358.6 ± 3.0≥ 40.0
# 280≤ 112≤ 87.049.4 ± 3.0≥ 33.0
# 320≤ 98.0≤ 74.041.1 ± 2.5≥ 27.0
# 360≤ 86.0≤ 66.036.1 ± 2.0≥ 23.0
# 400≤ 75.0≤ 58.030.9 ± 2.0≥ 20.0
# 500≤ 63.0≤ 50.026.4 ± 2.0≥ 16.0
# 600≤ 53.0≤ 43.021.1 ± 1.5≥ 13.0
# 700≤ 45.0≤ 37.017.9 ± 1.3≥ 11.0
# 800≤ 38.0≤ 31.014.7 ± 1.0≥ 9.00
# 1000≤ 32.0≤ 27.011.9 ± 1.0≥ 7.00
# 1200≤ 27.0≤ 23.09.90 ± 0.80≥ 5.50
# 1500≤ 23.0≤ 20.08.40 ± 0.60≥ 4.50
# 2000≤ 19.0≤ 17.06.90 ± 0.60≥ 4.00
# 2500≤ 16.0≤ 14.05.60 ± 0.50≥ 3.00
# 3000≤ 13.0≤ 11.04.00 ± 0.50≥ 2.00
# 4000≤ 11.0≤ 8.003.00 ± 0.40≥ 1.30

Reviews

There are no reviews yet.

Be the first to review “F360 F400 F600 Black silicon carbide for abrasion-protection coatings”

Your email address will not be published. Required fields are marked *

PDF-LOGO-100-.png

TDS not uploaded

PDF-LOGO-100-.png

MSDS not uploaded

Please enter correct URL of your document.

Scroll to Top