GC silicon carbide 8micron 9micron 10micron

GC silicon carbide 8micron 9micron 10micron

/MT

GC silicon carbide 8micron 9micron 10micron

Green Silicon carbide (SiC), also known as carborundum, is a compound of silicon and carbon with chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. Synthetic silicon carbide powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sintering to form very hard ceramics that are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic plates in bulletproof vests. Electronic applications of silicon carbide such as light-emitting diodes (LEDs) and detectors in early radios were first demonstrated around 1907. SiC is used in semiconductor electronics devices that operate at high temperatures or high voltages, or both. Large single crystals of silicon carbide can be grown by the Lely method; they can be cut into gems known as synthetic moissanite. Silicon carbide with high surface area can be produced from SiO2 contained in plant material.

Particle SizeParticle Distribution (µm)
Maximum Particle SizeParticle Size at d03Particle Size at d50Particle Size at d94
# 240≤ 127≤ 10358.6 ± 3.0≥ 40.0
# 280≤ 112≤ 87.049.4 ± 3.0≥ 33.0
# 320≤ 98.0≤ 74.041.1 ± 2.5≥ 27.0
# 360≤ 86.0≤ 66.036.1 ± 2.0≥ 23.0
# 400≤ 75.0≤ 58.030.9 ± 2.0≥ 20.0
# 500≤ 63.0≤ 50.026.4 ± 2.0≥ 16.0
# 600≤ 53.0≤ 43.021.1 ± 1.5≥ 13.0
# 700≤ 45.0≤ 37.017.9 ± 1.3≥ 11.0
# 800≤ 38.0≤ 31.014.7 ± 1.0≥ 9.00
# 1000≤ 32.0≤ 27.011.9 ± 1.0≥ 7.00
# 1200≤ 27.0≤ 23.09.90 ± 0.80≥ 5.50
# 1500≤ 23.0≤ 20.08.40 ± 0.60≥ 4.50
# 2000≤ 19.0≤ 17.06.90 ± 0.60≥ 4.00
# 2500≤ 16.0≤ 14.05.60 ± 0.50≥ 3.00
# 3000≤ 13.0≤ 11.04.00 ± 0.50≥ 2.00
# 4000≤ 11.0≤ 8.003.00 ± 0.40≥ 1.30
# 6000≤ 8.00≤ 5.002.00 ± 0.40≥ 0.80
# 8000≤ 6.00≤ 3.51.20 ± 0.30≥ 0.60(1)
# 100000.51~0.70

Foam ceramics raw materials green silicon carbide powder f1000f1200

Green silicon carbide application:

Materials for precision finishing grindstones (magnetic heads, etc.) and polishing grindstones

Cutting and precision lapping materials for crystals, silicon, various glass and magnetic materials

Cutting and precision lapping material for ceramic, super hard metal, new materials, etc.

Fine ceramic material / refractory material

Lapping material for SAW filters

Reviews

There are no reviews yet.

Be the first to review “GC silicon carbide 8micron 9micron 10micron”

Your email address will not be published. Required fields are marked *

PDF-LOGO-100-.png

TDS not uploaded

PDF-LOGO-100-.png

MSDS not uploaded

Please enter correct URL of your document.

Scroll to Top